Taylor-wharton XL-55 Manuel d'utilisateur télécharger pdf (Page 11)

Fill kits are available with different combinations of hose length and fittings for a specific

gas service. The following chart identifies the available transfer hoses and fill tee assem-

blies.

TRANSFER HOSE CHART

Description Cylinder End Part

(Service/Hose Length) Connections(s) Fittings Number

Inert (N2,Ar) Service

4 ft. (1.2 m) Stainless Steel LIQUID or VENT Valve CGA 295 to 3/8 in. NPT 1700-9C65

6 ft. (1.8 m) Stainless Steel LIQUID or VENT Valve CGA 295 to 3/8 in. NPT 1600-9C66

6 ft. (1.8 m) Stainless Steel USE Valve CGA 580 to 3/8 in. NPT GL50-8C51

Oxygen Service

6 ft. (1.8 m) Stainless Steel LIQUID or VENT Valve CGA 440 to 3/8 in. NPT GL-8C53

6 ft. (1.8 m) Stainless Steel USE Valve CGA 540 to 3/8 in. NPT GL50-8C56

VENT TEE CHART

The vent tee connects to transfer hose to complete a fill line kit. Each assembly includes

a 3/8 in. pipe connector to CGA fitting with a 350 psig (24 bar/2413 kPa) relief valve, and

a ball-type dump valve.

Fill Hose Kits

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Pas de commentaire

Taylor-wharton XL-55 Manuel d'utilisateur Page 11